A104SN03V.1友达10.4寸和15.6寸耐高低温屏H156DAN02.0参数：

一、

A104SN03V.1是友达推出的10.4英寸液晶模组产品，常用于数码相框、便携式DVD、工业等领域。其详细参数如下：

- 基本信息：工作温度为-10~60°C，存储温度为-20~70°C，作业湿度和保存湿度均为5-95%RH，当前生产状态为量产中。

- 结构特征：点分辨率为800(RGB)×600（SVGA），像素密度123PPI，像素排列为RGB垂直条状，宽高比4:3，点间距0.088×0.264mm，像素间距0.264×0.264mm。显示区域211.2×158.4mm，可视区域213.2×160.4mm，外观尺寸228.4×175.4×6.2±0.3mm，面板重量400±20g，表面为雾面、Hard coating(3H)处理，无触摸屏。

- 光学特征：显示模式为TN，常白显示，透射式。亮度350cd/m2(Typ.)，对比度500:1(Typ.)，显示颜色262K/16.2M（6-bit/6-bit+Dithering），显示色域50%NTSC(CIE1931)，响应时间30(Typ.)(Tr+Td)ms，可视角度75/75/50/60(Typ.)(CR≥10)（左/右/上/下），zuijia视角6o'clock，白色色度Wx:0.330、Wy:0.350，白场变动1.25/1.33(Typ./max.)(9points)。

- 发光系统：灯管位置为侧入式光源，光源类型为WLED，光源寿命10K(Min.)小时。单灯电压8.8/10.0/10.7V(Min./Typ./Max.)，单灯电流300mA(Typ.)，灯管总功率3.0/3.21W(Typ./Max.)。

- 信号接口：信号大类为TTL，小类为TTL(1ch,6/8-bit)+SPI，输入电压3.3/11/15/-7V(Typ.)，输入电流10/24/0.4/-0.4(Typ.)，功率消耗0.43W(Typ.)。接口类型为FPC，接口脚距0.5mm，接口数量1pcs，接口脚数60pins。

A104SN03V.1 is a 10.4-inch LCD module product launched by AUO, which is commonly used in digital photo frames, portable DVDs, industrial and other fields. Its detailed parameters are as follows:

- Basic Information: Operating temperature is -10~60°C, storage temperature is -20~70°C, operating humidity and storage humidity are both 5-95%RH, and the current production status is in mass production.

- Structural Features: Dot resolution is 800(RGB)×600 (SVGA), pixel density is 123PPI, pixel arrangement is RGB vertical stripe, aspect ratio is 4:3, dot pitch is 0.088×0.264mm, pixel pitch is 0.264×0.264mm. The display area is 211.2×158.4mm, visible area is 213.2×160.4mm, overall dimension is 228.4×175.4×6.2±0.3mm, panel weight is 400±20g, the surface is matte with Hard coating (3H) treatment, and there is no touch screen.

- Optical Features: Display mode is TN, normally white display, transmissive. Brightness is 350cd/m2 (Typ.), contrast ratio is 500:1 (Typ.), display color is 262K/16.2M (6-bit/6-bit+Dithering), display color gamut is 50% NTSC (CIE1931), response time is 30 (Typ.) (Tr+Td) ms, viewing angle is 75/75/50/60 (Typ.) (CR≥10) (left/right/up/down), optimal viewing angle is 6 o'clock, white chromaticity is Wx: 0.330, Wy: 0.350, white field variation is 1.25/1.33 (Typ./max.) (9 points).

- Lighting System: The lamp position is edge-lit light source, the light source type is WLED, and the light source life is 10K (Min.) hours. Single lamp voltage is 8.8/10.0/10.7V (Min./Typ./Max.), single lamp current is 300mA (Typ.), total lamp power is 3.0/3.21W (Typ./Max.).

- Signal Interface: The signal category is TTL, the sub-category is TTL (1ch, 6/8-bit) + SPI, input voltage is 3.3/11/15/-7V (Typ.), input current is 10/24/0.4/-0.4 (Typ.), power consumption is 0.43W (Typ.). Interface type is FPC, interface pin pitch is 0.5mm, number of interfaces is 1pcs, number of interface pins is 60pins.

二、

友达H156DAN02.0 规格参数：

 一、基本信息 

- 产品描述：15.6英寸1920 RGB×1080 TFT-LCD透射式液晶面板

- 型号：H156DAN02.0

- 客户：Zhihuan

- 版本信息：当前版本0.3，2024年7月30日更新，涉及外形尺寸和色度调整

- 核心技术：a-Si（非晶硅）技术、AHVA（广视角）技术，包含TFT-LCD、LCD驱动器、PCBA及TCON（时序控制器）

 二、关键特性：

 - 显示参数：15.6英寸（16:9），1920×1080分辨率（RGB条纹排列），1670万色

- 接口：2路LVDS（JEIDA格式DE模式）

- 其他：高透光率、防眩光表面处理、符合RoHs标准 

物理规格项目参数：

屏幕尺寸 15.6英寸 

有效显示区域 344.16mm（宽）×193.59mm（高） 

面板尺寸 349.06mm（宽）×203.44mm（高） 

像素间距 0.17925mm（宽）×0.17925mm（高） 

驱动IC Source：RM97030 

重量 待定（TBD） 

电气规格：

1.?电源参数

亮度：250-1000cd/m2

视角：80/80/80/80

对比度：800:1

- LCD供电（LCD_VCC）：典型3.3V，极限-0.3V~4V

- LED供电（LED_VCC）：典型12V，范围11V~13V

2.?引脚定义：共40pin，包含电源、地、LED控制、LVDS差分数据及时钟输入等，其中14 - 16pin为AUO测试专用反向引脚

3.?Zui大额定值

- 工作温度：-30°C~70°C

- 存储温度：-30°C~80°C 

光学规格项目参数：

响应时间（Tr+Tf） 典型25ms，Zui大30ms 

对比度 Zui小700，典型800 

NTSC色域 典型72%（C光源） 

视角 上下左右均≥80°（对比度≥10时） 

透光率 典型3.17%（无APCF及Haze）  

时序与可靠性：

 1.?时序特性

- 时钟频率：138 - 165MHz（典型150MHz）

- 帧率：55 - 65Hz（典型60Hz）

2.?可靠性测试：包含高低温存储/运行、湿热测试、热冲击（-30°C~70°C，100循环）、静电放电（接触±6kV，空气±8kV）等，测试时长均为240小时（热冲击除外）

 七、包装与运输：

 - 包装规格：每托盘2片面板，13托盘/纸箱（含1个备用托盘），每箱共24片

- 包装材料：EPE缓冲材、铝箔袋（抽真空）、PP板固定

- 栈板尺寸：1150mm×840mm×132mm，每层可放4箱，Zui多堆叠5层

 AUO Specifications of H156DAN02.0

I. Basic Information

- Product Description: 15.6-inch 1920 RGB×1080 TFT-LCD transmissive liquid crystal panel

- Model: H156DAN02.0

- Customer: Zhihuan

- Version Information: Current version 0.3, updated on July 30, 2024, involving adjustments to  dimensions and chromaticity

- Core Technologies: a-Si (amorphous silicon) technology, AHVA (Advanced Hyper View Angle) technology, including TFT-LCD, LCD driver, PCBA and TCON (timing controller)

II. Key Features

- Display Parameters: 15.6 inches (16:9), 1920×1080 resolution (RGB stripe arrangement), 16.7 million colors

- Interface: 2-port LVDS (JEIDA format DE mode)

- Others: High transmittance, anti-glare surface treatment, RoHS compliant

III. Physical Specifications

Item Parameter 

Screen Size 15.6 inches 

Active Area 344.16mm (W) × 193.59mm (H) 

Panel Dimension 349.06mm (W) × 203.44mm (H) 

Pixel Pitch 0.17925mm (W) × 0.17925mm (H) 

Driver IC Source: RM97030 

Weight TBD (To Be Determined) 

IV. Electrical Specifications

Brightness: 250-1000cd/m2

Viewing Angle: 80/80/80/80

Contrast Ratio: 800:1

1.?Power Parameters

- LCD Power Supply (LCD_VCC): Typical 3.3V, Limit -0.3V~4V

- LED Power Supply (LED_VCC): Typical 12V, Range 11V~13V

2.?Pin Definition: 40 pins in total, including power supply, ground, LED control, LVDS differential data and clock input, etc. Pins 14-16 are reverse pins dedicated to AUO testing

3.?Absolute Maximum Ratings

- Operating Temperature: -30°C~70°C

- Storage Temperature: -30°C~80°C

V. Optical Specifications

Item Parameter 

Response Time (Tr+Tf) Typical 25ms, Maximum 30ms 

Contrast Ratio Minimum 700, Typical 800 

NTSC Color Gamut Typical 72% (C light source) 

Viewing Angle All directions (up, down, left, right) ≥80° (when contrast ratio ≥10) 

Transmittance Typical 3.17% (without APCF and Haze) 

VI. Timing and Reliability

1.?Timing Characteristics

- Clock Frequency: 138-165MHz (Typical 150MHz)

- Frame Rate: 55-65Hz (Typical 60Hz)

2.?Reliability Tests: Including high and low temperature storage/operation, damp heat test, thermal shock (-30°C~70°C, 100 cycles), electrostatic discharge (contact ±6kV, air ±8kV), etc. The test duration is 240 hours for all except thermal shock.

VII. Packaging and Transportation

- Packaging Specification: 2 panels per tray, 13 trays per carton (including 1 spare tray), 24 panels per carton in total

- Packaging Materials: EPE buffer material, aluminum foil bag (vacuumized), PP board for fixation

- Pallet Dimension: 1150mm×840mm×132mm, 4 cartons can be placed per layer, with a maximum stacking height of 5 layers